TYPE OF PROFILE Profiles in polished silver aluminum and matte black.

ADJUSTMENT PROFILES The Trio model is available in stock in pre-established standard sizes and with ranges that allow us to adapt to the gap (see Trio model tables in the catalog). These ranges are achieved by adjusting the upper guide to the necessary size and with a greater or lesser overlap of the door over the fixed part (3-13 cm). Therefore, during installation, it will be necessary to cut the upper guide to adapt it to our gap, for which a steel cutting saw will suffice.

GLASS AND DECORATIONS GME only works with tempered glass shower screens. Tempered glass is a type of safety glass, processed with thermal or chemical treatments to increase its strength compared to regular glass. Tempered glass, when broken, shatters into many small pieces instead of splintering into large jagged fragments. These small pieces are less likely to cause injuries. This shower screen has 6 mm thick tempered safety glass. The screen can be chosen with transparent glass. Another decoration option is our adhesive vinyls (delivery time 7 days).

OPENING The opening system is through 2 sliding panels, which are equipped with bearings that slide along the upper guide.

CLOSING SYSTEM The closing system of the Trio front with 1 fixed and 2 sliding panels is through bubble rubber, which is inserted into the sliding panel and closes by fitting into the vertical profile. The closing system in the angular format, with fixed side, is through magnetic closure.

WATER TIGHTNESS The shower screen has vertical water deflector rubbers to ensure water tightness in the gap between the fixed part and the sliding panels. The shower screen lacks a guide in the lower part, so to provide good water tightness, we must install a water deflector rubber at the bottom of the sliding panels and a metal water deflector on the shower tray (1 cm high and 0.8 cm wide).