TYPE OF PROFILE Profiles in stainless steel treated with a process known as mirror polishing (brightness comparable to chrome plating), which makes them easier to clean.

ADJUSTMENT AND COMPENSATION PROFILES The vertical profiles of the shower screen allow for adjustment and enable us to adapt it correctly to the conditions of the construction, overcoming any unevenness that may exist in the walls and adjusting to the necessary light gap. Specifically, the width of the fixed glass profile is 2.4 cm, which allows us to overcome any misalignments that may exist in the walls of our shower tray or bathtub. The Moving model is available in stock in pre-established standard sizes and with ranges that allow us to adapt to the gap (see tables in the catalog). These ranges are achieved by adjusting the upper guide to the necessary size and with a greater or lesser overlap of the door over the fixed part (1-6 cm). Therefore, during installation, it will be necessary to cut the upper guide to adapt it to our gap, for which a steel cutting saw will suffice.

GLASS AND DECORATIONS GME only works with tempered glass shower screens. Tempered glass is a type of safety glass, processed with thermal or chemical treatments to increase its strength compared to regular glass. Tempered glass, when broken, shatters into many small pieces instead of splintering into large jagged fragments. These small pieces are less likely to cause injuries. This shower screen has 8 mm thick tempered safety glass. The screen can be decorated with our adhesive vinyls or with the possibility of digital printing.

OPENING The opening system is through sliding panels, which are equipped with bearings that slide along the upper bar.

CLOSING SYSTEM The closing system of the shower screen is magnetic, providing great comfort and tightness when closing the screen.

WATER TIGHTNESS The shower screen has vertical water deflector rubbers to ensure water tightness in the gap between the sliding panel and the fixed glass. The shower screen lacks profiling in the lower part, so to provide good water tightness, we must install a water deflector rubber at the bottom of the sliding panel and a metal water deflector on the shower tray (0.9x0.9 cm).