TYPE OF PROFILES
Bright silver polished aluminum profiles.
ADJUSTMENT PROFILES
The Trio model is in stock in standard sizes already established and with ranges that allow us to adapt to the opening (see Trio model tables in the catalog). These ranges are achieved by adapting the upper guide to the required size and with a greater or lesser overlap of the door over the fixed panel (3-13 cm). Therefore during the installation it will be necessary to cut the upper guide to adapt it to our opening, for it will be enough with a saw of cut for steel.
GLASS AND DECORATIONS
GME only works with tempered glass partitions. Tempered glass is a type of safety glass, it is processed with thermal or chemical treatments, to increase its strength compared to normal glass. Tempered glass, when broken, splits into a multitude of small pieces instead of splintering into large jagged shards. These tiny pieces are less likely to cause injury.
This shower enclosure has 6mm thick tempered safety glass.
The shower enclosure is available with clear glass.
Another decoration option is our adhesive vinyls (delivery time 7 days).
OPENING
The opening system is by means of 2 sliding leaves, which are provided with bearings that slide along the upper guide.
CLOSING SYSTEM
The closing system of the Trio front with 1 fixed and 2 sliding panels is by means of bubble rubber, which is inserted into the sliding panel and closes by inserting itself into the vertical profile.
The closing system in the corner format, with fixed side panel, is by means of magnetic locking.
WATERTIGHTNESS
The shower enclosure has no guide in the lower part of the enclosure, so, to provide a good watertightness, we must install a rubber gutter.
The shower enclosure has no guide in the lower part of the shower enclosure, so to provide a good seal, we must install a rubber gutter at the bottom of the sliding panels and a metal gutter on the shower tray (1 cm high and 0.8 cm wide) to ensure the seal in the gap between the fixed panel and the sliding panels.
DESIGN IN SMALL SPACES
Shower enclosure series Trio with 3 sliding panels
Aluminum shower enclosure with 6mm glass. The Trio model is available in front and front + fixed panel format in sizes from 86 to 160cm, with the possibility of adapting fixed panels of 70 and 80cm.
The Trio model is characterized by its 3-leaf system, one fixed + 2 sliding, ideal for small spaces due to the width of its entrance.
It is presented in format without lower profiles following the latest market trends.
If you wish to purchase this product, please let us know and if you wish to become a distributor, please contact us.
Anti-limescale treatment
EnduroShield is a new permanent protective coating for glass, invisible and non-adherent. With a single application it makes dirt, limescale and soap scum up to 90% easier to clean. The Trio 3-leaf shower enclosure has it applied as standard on its models.
QUALITY CERTIFICATES
Concerned about the quality we offer to our customers, GME DIVISION BATHROOMS SL has certificates that guarantee the quality of all its products, which comply with all European standards.
At the same time GME DIVISION BAÑOS SL is associated to AIDIMA (Technological Institute), in which inspections and laboratory tests are carried out to guarantee the quality and good performance of the products we offer.
Measurements of the crystals of the shower enclosure series Trio of GME: consult excel.
EXCHANGES AND RETURNS
To request an exchange or a return, you must send us by fax or e-mail the following information: model, reference and reason for the request for exchange or return. Once the return has been accepted, we will proceed to send the invoiced material for exchange and the invoice will be paid once the material has been returned to us.
Returns that have not been analyzed and authorized by GME will not be accepted.
In the event that the collection is due to an error beyond GME’s control, it will be accepted, provided that the box is intact, and an amount of 40 euros will be invoiced for the collection procedures
