TYPE OF PROFILES

Stainless steel profiles treated with a process known as mirror polishing (brightness comparable to chrome plating) which makes them easier to clean.

ADJUSTMENT AND COMPENSATION PROFILES

The vertical profiles of the shower enclosure allow the adjustment of the shower enclosure and make it possible to adapt it correctly to the conditions of the work, saving the possible unevenness that may exist in the walls and adjusting to the necessary light gap.

Specifically, the width of the fixed glass profile is 2.4 cm, which will allow us to save the gaps that may exist in the walls of our shower tray or bathtub. The Vetrum model is in stock in some standard measures already established and with some ranges that allow us to adapt to the hollow (see tables Vetrum model in catalog).

These ranges are achieved by adapting the lower flashing to the required size and with a greater or lesser overlap of the door over the fixed (1-6 cm). Therefore, during the installation it will be necessary to cut the lower flashing to adapt it to our opening, for this purpose it will be enough with a steel cutting saw.

These ranges are achieved by adapting the lower flashing to the required size and with a greater or lesser overlap of the door over the fixed one (1-6 cm). Therefore, during the installation it will be necessary to cut the lower flashing to adapt it to our opening, for which a steel cutting saw will suffice.

GLAZING AND DECORATIONS

GME only works with tempered glass partitions. Tempered glass is a type of safety glass, it is processed with thermal or chemical treatments, to increase its resistance compared to normal glass. Tempered glass, when broken, splits into a multitude of small pieces instead of splintering into large jagged shards. These tiny pieces are less likely to cause injury.

This shower enclosure has 8mm thick tempered safety glass in the sliding and 10mm thick tempered safety glass in the fixed glass.

Another decoration option is our adhesive vinyls (delivery time 7 days) or the possibility of digital printing (delivery time 20 days).

OPENING

The opening system is by means of sliding leaves, which are provided with bearings that slide along the fixed glass and the lower metal flashing.

CLOSING SYSTEM

The closing system of the shower enclosure is by means of magnetic closure, which provides great comfort and watertightness when closing the enclosure.

WATERTIGHTNESS

The shower enclosure has a vertical rubber gutter to guarantee watertightness in the gap between the sliding panel and the fixed glass.

The shower enclosure has no guide in the lower part of the screen, it only has a metal gutter on the shower tray (1.8 cm high and 0.8 cm wide) through which the bearing runs.