TYPE OF PROFILES

Stainless steel profiles treated with a process known as mirror polishing (brightness comparable to chrome plating) which makes them easier to clean.

ADJUSTMENT AND COMPENSATION PROFILES

The vertical profiles of the shower enclosure allow the adjustment of the shower enclosure and make it possible to adapt it correctly to the conditions of the construction site, saving the possible unevenness that may exist in the walls and adjusting it to the necessary light gap.

Specifically, the Futura model’s profile width is 2.3 cm, which will allow us to bridge any gaps that may exist in the walls of our shower tray or bathtub. The Futura model is available in stock in standard sizes already established and with ranges that allow us to adapt to the gap (see Futura model tables in the catalogue).

These ranges are achieved by adapting the upper guide to the required size and with a greater or lesser overlap of the door over the fixed panel (1-6 cm). Therefore, during installation it will be necessary to cut the upper guide to adapt it to our opening, for which a steel cutting saw will suffice.

GLASS AND DECORATIONS

GME only works with tempered glass partitions. Tempered glass is a type of safety glass, which is processed with heat or chemical treatments, to increase its strength compared to normal glass. Tempered glass, when broken, splits into a multitude of small pieces instead of splintering into large jagged shards. These tiny pieces are less likely to cause injury.

This shower enclosure has 6mm thick tempered safety glass.

The shower enclosure is available for immediate delivery with clear or frost plus screen printed glass and with stroke screen printing within 15 days. Another decoration option is our adhesive vinyls for shower enclosures (delivery time 7 days) or the possibility of digital printing (delivery time 20 days).

The Futura shower enclosure can be made to measure, modifying the width, height or making a cut-out in one of its panes. The delivery time is 15 days.

ANTI-LIMESCALE TREATMENT

This screen includes an anti-limescale treatment as standard, which covers the micropores of the glass, preventing the accumulation of limescale and facilitating the cleaning of the glass.

OPENING

The opening system is by means of sliding panels, which are fitted with bearings that slide along the upper guide.

LOCKING SYSTEM

The locking system varies from the fixed and sliding front model to the corner opening and corner with fixed side.

The closing system of the fixed and sliding front is by means of bubble rubber, which is inserted into the sliding leaf and closes by inserting itself into a vertical U-shaped stainless steel profile.

The closing system of the angular formats is by means of magnetic closure.

WATERTIGHTNESS

The shower enclosure is equipped with vertical gutter rubbers to guarantee the watertightness in the gap between the sliding panel and the fixed glass.

The shower enclosure lacks a guide in the lower part of the screen, so to provide a good seal, we must install a rubber gutter in the lower part of the sliding panel and a metal gutter on the shower tray (1 cm high and 0.6 cm wide).

Translated with DeepL.com (free version)